Honeywell Home

Honeywell T775U2006 Electronic Universal Controller, 2SPDT, 2 Analog outputs, 2 sensor inputs

(No reviews yet) Write a Review
SKU:
16572
UPC:
085267299336
MPN:
T775U2006
Condition:
New
Weight:
2.70 LBS
Shipping:
Calculated at Checkout
$372.98

Out of stock

Description

Series/Model: T775


Honeywell T775U2006 Electronic Universal Controller, 2SPDT, 2 Analog outputs, 2 sensor inputs
T775 electronic remote temperature controller, is the next generation in commercial/agricultural control - capable of remote sensing temperature, humidity, pressure, etc., and providing switched and/or proportional outputs to various types of loads.


Details:

  • Electronic Remote Temperature Controller
  • Type Universal, Stand-Alone
  • Temperature Range -40 to 125 Deg F at 50 Hertz, -40 to 140 Deg F at 60 Hertz
  • Contact Rating 10 Amp at 24 Volt AC (Resistive), 9.8 Amp at 120 Volt AC/4.9 Amp at 240 Volt AC (Full Load), 58.8 Amp at 120 Volt AC/29.4 Amp at 240 Volt AC (Locked Rotor), 125 Volt Amp at 120/240 Volt AC (Pilot Duty), 1/2 HP at 120/240 Volt AC
  • Contact Configuration (2) SPDT
  • Connection Type Conduit
  • Enclosure NEMA 1, IP65
  • Application Heating, Cooling, Boiler, Chiller
  • Approval UL (Canada and US), CUL, CE, C-Tick
  • Overall Dimension 4-13/32 Inch Width x 2-15/16 Inch Depth x 8-5/32 Inch Height
  • Power Consumption 8 Volt Amp at 60 Hertz/10 Volt Amp at 50 Hertz
  • Differential Temperature Rating 1 to 150 Deg F
  • Set Point Temperature Rating -40 to 248 Deg F
  • Number of Sensor Inputs 2
  • Sensor Element 1097 Ohm PTC at 77 Deg F
  • Maximum Distance to Sensor up to 1000 Foot
  • Output Type Relay with Reset
  • Save Time on Installations with the Easy to Use Graphical Interface, Large Display and the Intuitive Programming
  • Use the Time Clock Scheduler or Digital Input to Control the Setback and Disable Output Options to Help Save Energy
  • Protect Equipment from Freezing or Overheating on Models with the Modulating High or Low Limit Control Option
  • Get Pinpoint Control on Modulating Outputs by Setting the Integral and Derivative Times (Pi or Pid)
  • Configure Models with Reset in a Few Easy Steps
  • Control Floating Actuators with Floating Outputs on Select Models
  • Eliminate the Need for a Separate Time Delay Device and Protect Equipment with the Minimum Off Time

Safety Information


California Proposition 65 Warning SymbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This product and other products on our site may contain a chemical known to the state of California to cause cancer or birth defects or other reproductive harm. Visit the state of California's website to learn more about Proposition 65.

Many of our items should be installed by a trained HVAC technician. With purchase of this item, you are agreeing to follow any and all safety guidelines provided by the manufacturer and to have the item installed by a trained HVAC technician as necessary. Your professional installer assumes all responsibility for injury or property damage that may result.

View AllClose

Warranty Information

The items we offer on our website are professional grade products that are designed and built to be installed by licensed, professional tradesmen. Because of the professional install these products carry a longer warranty, different than found in similar products offered by big box stores for do it yourselfers. We encourage you to be a licensed HVAC contractor or to hire a Licensed HVAC contractor to be sure you can truly get the manufacturer's warranty. Many manufacturers will request a copy of the contractor license or a bill of install to start the warranty procedure. HVAC Wholesale Direct is a distributor and is not responsible for labor claims, supplies or refrigerant cost recovery or rejected manufacturer's warranty due to misapplication or for operating outside the terms of a manufacturer's warranty.

box graphic

30-Day Hassle-Free Return Policy
After 30 days, we will still accept returns but with a 15% Restocking Fee for up to 90 Days

Return terms and conditions: Item(s) must be new and unused in the original packaging with all original documentation included.

Upon receipt of the returned item(s) an inspection will be performed to ensure the above terms and conditions have been met.
If they have, we will issue a refund back to the original method of payment used at time of sale, less our original cost of shipping. If the terms and conditions have not been met, we will contact you to arrange for the items to be returned to you at your expense.

You are responsible for return shipping costs.
We recommend you insure the shipment against loss or damage. Any return shipping damage claims will be your responsibility.


Return Instructions - Non Damage Items

You must ...

  • Request a return via our Contact Us link
  • Include your order / invoice number
  • Provide a reason for your return request
  • State if you want a replacement or a refund

Once we receive your request, we will respond with either an authorization to return, or deny the request with an explanation. If the request is authorized, we will also provide instructions on how and where to return the purchase. Upon receipt of the item(s) back, an inspection will be performed to determine if the item(s) can be returned to the shelf or not. If they can, we will comply with your request for a replacement item(s) or a refund. Refunds will always be issued back to the method of payment used for the original purchase. If the item(s) can not be returned to the shelf for resale, they will be returned to you at your expense.

Items Damaged During Shipment

Occasionally, items are damaged in shipment. It is the buyer's responsibility to inspect for damage upon receipt from the shipping / delivery company. It's best to refuse the delivery and notate the damage on the driver's bill. It's always best to take a picture and let us know, so we can make arrangements to get you a replacement as quickly as possible. Once you accept the shipment, any damage claims at that time are between the delivery company and the buyer. We inspect every item / shipment for damage prior to tendering the items to the delivery company.

Defective Items

If your reason for returning the item in the instructions above is due to a manufacturer defect, you must state that in your return request, as it will affect the instructions for returning the item. Many manufacturers have specific procedures that must be followed in order to process these claims. A detailed description of the defect must be provided. You may be asked to provide additional information such as, a service ticket showing the diagnosis from a licensed HVAC professional, pictures of the defect, etc. These additional pieces of information will help to expedite the process in many cases. Some manufacturers will not proceed without that additional information.

HVAC Wholesale Direct vendor network is made up of some of the finest manufactures of HVAC products. We will be here to assist you. We however, do not have any control over the manufacturers and their warranty practices and make no claim on honoring warranty on behalf of any manufacturer. HVAC Wholesale Direct is not responsible for shipping or freight charges for any warranty claims made that we are helping to facilitate. We issue credit after we receive credit from the manufacturer.

Electrical Parts

Electrical parts, such as capacitors, contactors, transformers, and thermostats are NON-ReturnABLE. HVAC Wholesale Direct is not liable for improper selection and/or installation of electrical parts and controls.

At the end of the day we are people doing business with people in a modern environment. We want you to be happy with your experience with our company. We promise to work with all of our customers, within good reason, to resolve any conflicts, whether defective or mis-ordered to your satisfaction.

View AllClose

Additional Information

Type:
Universal, Stand-Alone
Temperature Range:
-40 to 125 Deg F at 50 Hertz, -40 to 140 Deg F at 60 Hertz
Contact Rating:
10 Amp at 24 Volt AC (Resistive), 9.8 Amp at 120 Volt AC/4.9 Amp at 240 Volt AC (Full Load), 58.8 Amp at 120 Volt AC/29.4 Amp at 240 Volt AC (Locked Rotor), 125 Volt Amp at 120/240 Volt AC (Pilot Duty), 1/2 HP at 120/240 Volt AC
Contact Configuration:
(2) SPDT
Connection Type:
Conduit
Enclosure:
NEMA 1, IP65
Application:
Heating, Cooling, Boiler, Chiller
Approval:
UL (Canada and US), CUL, CE, C-Tick
UOM:
ea
View AllClose